Wed, 02 Jan 2013 14:03:30 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Wed, 02 Jan 2013 14:03:30 +0000 linkquote
Finally i took some pictures of my 2009 GTS 300 ongoing project.
I bought this 300 second hand with only 1800 km on the tacho.
So far i did these mods :

Cosmetical :

*13 inch MP3 500 Business wheels powdercoated in satin black with white reflective rim striping
* Debadged
* Leds all round.
* Daylight "running" lights using bottom front indicators : Running lights for the GTS.
* Osram H4 Night breaker headlight
* Smidsy Brake light modulator : Tailmate brake light flasher
* 70 mm "Fake" Oberon mirrors using original bar ends painted black.
* Piaggio Vespa mono gel saddle : New mono gel saddle for the GTS
* Jettin black short visor
* Ram mount for GPS + power cable : Progetto RAM (for LX & GTS)
* Chrome nose grill painted black
* Dashboard painted black
* Black SIP sport lever set

Mechanical :

* Oil temperature gauge
* Malossi springs front & rear
* Optima 4 battery charger connector (lengthened & repositioned to the rear)
* Remus SS exhaust without cat. DB killer shortened for some extra noise.
* Repositioned the attachment of the spring from the side stand so it remains in it's open position.
* Malossi Vario
* Malossi Torque Drive
* Malossi Torsion controller
* Zelioni type III brake discs
* Malossi MHR synt. brake pads


*13 inch MP3 500 Business wheels powdercoated in satin black with white reflective rim striping






* Daylight "running" lights using bottom front indicators


* Dashboard painted black


* Repositioned the attachment of the spring from the side stand so it remains in it's open position.


* Smidsy Brake light modulator


* Remus SS exhaust without cat. DB killer shortened for some extra noise.



Last edited by Progetto 300 on Thu, 28 Aug 2014 13:47:30 +0000; edited 15 times
Wed, 02 Jan 2013 17:14:42 +0000

Lurker
GTS super
Joined: Fri, 26 Oct 2012 14:29:47 +0000
Posts: 4
Location: Zwalm
 
Lurker
GTS super
Joined: Fri, 26 Oct 2012 14:29:47 +0000
Posts: 4
Location: Zwalm
Wed, 02 Jan 2013 17:14:42 +0000 linkquote
where can we find those Oberon mirrors?
Do you have some manual for installing the mirrors on the original bar ends?

Thanks!

Arnout
Wed, 02 Jan 2013 17:46:58 +0000

Addicted
Vespa lxv 125 vie dell moda Chianti
Joined: Wed, 29 Aug 2012 07:06:03 +0000
Posts: 855
Location: Cheshire
 
Addicted
Vespa lxv 125 vie dell moda Chianti
Joined: Wed, 29 Aug 2012 07:06:03 +0000
Posts: 855
Location: Cheshire
Wed, 02 Jan 2013 17:46:58 +0000 linkquote
http://www.oberon-performance.com/acatalog/Oberon_Mirrors.html
Link to there site

Mark
Wed, 02 Jan 2013 23:02:13 +0000

Hooked
GTS300 Intermission
Joined: Thu, 01 Nov 2012 18:06:49 +0000
Posts: 275
Location: UK
 
Hooked
GTS300 Intermission
Joined: Thu, 01 Nov 2012 18:06:49 +0000
Posts: 275
Location: UK
Wed, 02 Jan 2013 23:02:13 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Progetto 300 wrote:
Hi Kristof,
I envy the look of your Scoot. Clean lines and uncluttered.
Verrry nice.

Cosmetical :

* Oberon mirrors using original bar ends.
I have the same but used the bar ends supplied. 75mm dia are best and offer suprisingly good field of vision. Why did you use the original bar ends?

* Piaggio Vespa mono gel saddle : New mono gel saddle for the GTS
We've discussed in other posting. Now you've had an opportunity to test the seat how comfortable do you find it? and seating position?
btw I like the look of the Pirate Upholstery "Cafe' Racer GTS lowered" I'll have to add to my wish list for now (limited budget)

* Jettin black short visor
Nice, could probably stretch to that.

* Dashboard painted black
I might have a go at this when I get some spare time. Looks cool.

* Testing the Dr.Pulley myth...
I'm waiting for my 13g's from SIP. I noticed they sell 13.5's but didn't see these on DR. Pulley's own site!
keep us posted on your testing. I'll do the same.

Chris.
Thu, 03 Jan 2013 08:14:04 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Thu, 03 Jan 2013 08:14:04 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Arthriticdigit wrote:
* Oberon mirrors using original bar ends. Why did you use the original bar ends?

Well, my dealer had those laying around ready to use with the Oberons. Holes drilled and tapped. Also the heavier weights. The Oberons are made of alu.

* Piaggio Vespa mono gel saddle : New mono gel saddle for the GTS
Now you've had an opportunity to test the seat how comfortable do you find it? and seating position?

Very comfortable but i've still have to test it for a longer period of driving.
I'll post the result here.

* Jettin black short visor
Nice, could probably stretch to that.

Maybe i'm going to paint that in the body color, that was my original idea.

* Dashboard painted black
I might have a go at this when I get some spare time. Looks cool.

Painted in body color looks even better.

* Testing the Dr.Pulley myth...
I'm waiting for my 13g's from SIP. I noticed they sell 13.5's but didn't see these on DR. Pulley's own site!
keep us posted on your testing. I'll do the same.

I'm waiting for 12 gr's. Not shure if i made the correct decision...

Chris.
[/quote]
Thu, 03 Jan 2013 08:38:24 +0000

Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
 
Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
Thu, 03 Jan 2013 08:38:24 +0000 linkquote
nice 300 , how is the view in those mirrors ?
Thu, 03 Jan 2013 08:46:50 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Thu, 03 Jan 2013 08:46:50 +0000 linkquote
patje007 wrote:
nice 300 , how is the view in those mirrors ?
Perfect !
Thu, 03 Jan 2013 09:29:23 +0000

Hooked
Joined: Sun, 19 Sep 2010 13:56:10 +0000
Posts: 218
Location: Athens Greece
 
Hooked
Joined: Sun, 19 Sep 2010 13:56:10 +0000
Posts: 218
Location: Athens Greece
Thu, 03 Jan 2013 09:29:23 +0000 linkquote
Can you get a closer picture to the bar ends.I want to see how the mirrors are fitted.Thanks.
Thu, 03 Jan 2013 09:37:42 +0000

Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
 
Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
Thu, 03 Jan 2013 09:37:42 +0000 linkquote
Progetto 300 wrote:
patje007 wrote:
nice 300 , how is the view in those mirrors ?
Perfect !
from where are you in BE ?
Thu, 24 Jan 2013 08:56:08 +0000

Hooked
2010 Scarabeo 300
Joined: Sat, 25 Jun 2011 10:14:45 +0000
Posts: 222
Location: Brisbane, Qld, AU
 
Hooked
2010 Scarabeo 300
Joined: Sat, 25 Jun 2011 10:14:45 +0000
Posts: 222
Location: Brisbane, Qld, AU
Thu, 24 Jan 2013 08:56:08 +0000 linkquote
That's a lovely looking scoot - nice clean lines
Thu, 24 Jan 2013 10:44:46 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Thu, 24 Jan 2013 10:44:46 +0000 linkquote
panos wrote:
Can you get a closer picture to the bar ends.I want to see how the mirrors are fitted.Thanks.
Last week, i changed the mirrors for "fake" Oberons :

http://www.scooter-center.com/scoweb/pages/productdetail.grid?product=325565290863232&category1=A&category2=CAT&lang=de

A friend of mine bought these but would not use them.





Here's a picture of the Oberon and "china" mirror set:



The original Oberons i have are silver (aluminum) 60 mm ones with flat mirror.
The fakes are black 70 mm ones with convex mirror. The bar-ends are made of aluminum

The thicker end of the rod fits in to the bar-end in two ways, at the side or at the end of the bar-end and is hold in place using a M10 Allen bolt.
The mirror goes on, on the other side using a M4 Allen bolt.
You have to cut the smaller end of the bar-and because the steering rod is not hollow and the bar-ends will not fit.

I have not used the original aluminum bar-end of the sets but special made iron ones. (using the original bar-ends).
Thu, 24 Jan 2013 16:06:16 +0000

Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
 
Enthusiast
orange gts 300 SS & white gts 300 S
Joined: Tue, 01 Jan 2013 16:29:08 +0000
Posts: 70
Location: Belgium
Thu, 24 Jan 2013 16:06:16 +0000 linkquote
looks nice , are they firm / don't shake ?
Tue, 19 Feb 2013 13:32:44 +0000

Hooked
T5 Classic 152. PX 187 in bits. 300ie Supersport
Joined: Sun, 10 Feb 2013 11:38:29 +0000
Posts: 196
Location: Northumberland, UK.
 
Hooked
T5 Classic 152. PX 187 in bits. 300ie Supersport
Joined: Sun, 10 Feb 2013 11:38:29 +0000
Posts: 196
Location: Northumberland, UK.
Tue, 19 Feb 2013 13:32:44 +0000 linkquote
Really like that..............

The cosmetic changes are great. Almost like the "plainness" of the scooter makes it looks so good........
⬆️    About 9w elapsed between posts    ⬇️
Sat, 20 Apr 2013 18:49:30 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Sat, 20 Apr 2013 18:49:30 +0000 linkquote
Finally got my 13 inchers shod with Conti Twist Sports & 15 mm white reflective striping.







Sun, 21 Apr 2013 19:09:51 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Sun, 21 Apr 2013 19:09:51 +0000 linkquote
More pictures :





Sun, 21 Apr 2013 19:18:21 +0000

Ossessionato
GTS 300 70th Anniversary
Joined: Tue, 04 Aug 2009 14:16:52 +0000
Posts: 3367
Location: Bromsgrove, UK
 
Ossessionato
GTS 300 70th Anniversary
Joined: Tue, 04 Aug 2009 14:16:52 +0000
Posts: 3367
Location: Bromsgrove, UK
Sun, 21 Apr 2013 19:18:21 +0000 linkquote
The wheels look great.
Does it feel any different when riding it?
Sun, 21 Apr 2013 19:28:24 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Sun, 21 Apr 2013 19:28:24 +0000 linkquote
Dr Zoidberg wrote:
The wheels look great.
Does it feel any different when riding it?
At this moment the ride is harder than usual, maybe because the tires are new and in combo with the low profile.
I'm running 2,0 bar front and rear now but also Malossi's around and adjusted.
Mon, 22 Apr 2013 05:41:15 +0000

Addicted
GTS 125 I.E.
Joined: Thu, 29 Dec 2011 06:27:48 +0000
Posts: 824
Location: Belgium (lies on the left from the moon)
 
Addicted
GTS 125 I.E.
Joined: Thu, 29 Dec 2011 06:27:48 +0000
Posts: 824
Location: Belgium (lies on the left from the moon)
Mon, 22 Apr 2013 05:41:15 +0000 linkquote
very nice !! love the new wheels ! 8) 8)
Fri, 26 Apr 2013 10:32:44 +0000

Member
Vespa GTV 250 Cc Via monte napoleone
Joined: Mon, 09 Apr 2012 06:31:51 +0000
Posts: 48
Location: Piraeus-Greece
 
Member
Vespa GTV 250 Cc Via monte napoleone
Joined: Mon, 09 Apr 2012 06:31:51 +0000
Posts: 48
Location: Piraeus-Greece
Fri, 26 Apr 2013 10:32:44 +0000 linkquote
size
im just wondering if this flasher from superBrightleds has the correct size to fit back of the light for VESPA GTV
I DONT SEE ENOUGH SPACE BACK
Fri, 26 Apr 2013 11:41:20 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Fri, 26 Apr 2013 11:41:20 +0000 linkquote
dimitrios wrote:
im just wondering if this flasher from superBrightleds has the correct size to fit back of the light for VESPA GTV
I DONT SEE ENOUGH SPACE BACK
If i can fit in the the rear light and the rear lights are both the same on GTS & GTV models....




Sat, 27 Apr 2013 00:30:01 +0000

Member
Vespa GTV 250 Cc Via monte napoleone
Joined: Mon, 09 Apr 2012 06:31:51 +0000
Posts: 48
Location: Piraeus-Greece
 
Member
Vespa GTV 250 Cc Via monte napoleone
Joined: Mon, 09 Apr 2012 06:31:51 +0000
Posts: 48
Location: Piraeus-Greece
Sat, 27 Apr 2013 00:30:01 +0000 linkquote
question
Hi progetto
i can see that you r using the small one the (black)
The back flasher from superBrightLEDS is almost double size
BUT THE PRICE ON SUPERBRIGHTLEDS IS REALLY ATTRACTIVE

IF 300 AND GTV HAVE THE SAME LIGHTS THE ONLY REMAINING IS THE SIZE
⬆️    About 1y elapsed between posts    ⬇️
Sat, 16 Aug 2014 13:15:28 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Sat, 16 Aug 2014 13:15:28 +0000 linkquote
Sold my 13" MP3 Yourban wheels to get these 13" MP3 500 Business wheels powdercoated in satin black with white reflective rimstriping. I also fitted Zellioni brake discs & Malossi MHR Synth pads. Tyres are Michelin Power Pure 140-60/13 back, 130-60/13 front.









⬆️    About 37w elapsed between posts    ⬇️
Wed, 29 Apr 2015 07:16:52 +0000

Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
 
Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
Wed, 29 Apr 2015 07:16:52 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Ok below in bold red, how did you customize the stock bar ends to fit those mirrors?? I want to do that! I have a good machinist.
Progetto 300 wrote:
Finally i took some pictures of my 2009 GTS 300 ongoing project.
I bought this 300 second hand with only 1800 km on the tacho.
So far i did these mods :

Cosmetical :

*13 inch MP3 500 Business wheels powdercoated in satin black with white reflective rim striping
* Debadged
* Leds all round.
* Daylight "running" lights using bottom front indicators : Running lights for the GTS.
* Osram H4 Night breaker headlight
* Smidsy Brake light modulator : Tailmate brake light flasher
* 70 mm "Fake" Oberon mirrors using original bar ends painted black.
* Piaggio Vespa mono gel saddle : New mono gel saddle for the GTS
* Jettin black short visor
* Ram mount for GPS + power cable : Progetto RAM (for LX & GTS)
* Chrome nose grill painted black
* Dashboard painted black
* Black SIP sport lever set

Mechanical :

* Oil temperature gauge
* Malossi springs front & rear
* Optima 4 battery charger connector (lengthened & repositioned to the rear)
* Remus SS exhaust without cat. DB killer shortened for some extra noise.
* Repositioned the attachment of the spring from the side stand so it remains in it's open position.
* Malossi Vario
* Malossi Torque Drive
* Malossi Torsion controller
* Zelioni type III brake discs
* Malossi MHR synt. brake pads
Wed, 29 Apr 2015 07:29:57 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Wed, 29 Apr 2015 07:29:57 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
[quote="elsizzle2000"]Ok below in bold red, how did you customize the stock bar ends to fit those mirrors?? I want to do that! I have a good machinist.
Progetto 300 wrote:
* 70 mm "Fake" Oberon mirrors using original bar ends painted black.
Well, i did not, my dealer did this for me using the original heavy weights and as template the original Oberon mirrors is had from my LX.
Wed, 29 Apr 2015 07:32:05 +0000

Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
 
Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
Wed, 29 Apr 2015 07:32:05 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Ah ok. Thanks for the inspiration! I'm going to do exactly this. I been on the hunt for clean and sleek bar ends and sat the Oberon (or fakes) but kne they were aluminum so would lighten the bars and may alter handling. With this "mod" I keep my stock weighted bar ends WITH functional and leek mirrors!

[quote="Progetto 300"]
elsizzle2000 wrote:
Ok below in bold red, how did you customize the stock bar ends to fit those mirrors?? I want to do that! I have a good machinist.
Progetto 300 wrote:
* 70 mm "Fake" Oberon mirrors using original bar ends painted black.
Well, i did not, my dealer did this for me using the original heavy weights and as template the original Oberon mirrors is had from my LX.
Sun, 03 May 2015 07:02:20 +0000

Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
 
Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
Sun, 03 May 2015 07:02:20 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
How do I get ahold of your dealer? Can he sell me a set?

[quote="Progetto 300"]
elsizzle2000 wrote:
Ok below in bold red, how did you customize the stock bar ends to fit those mirrors?? I want to do that! I have a good machinist.
Progetto 300 wrote:
* 70 mm "Fake" Oberon mirrors using original bar ends painted black.
Well, i did not, my dealer did this for me using the original heavy weights and as template the original Oberon mirrors is had from my LX.
Sun, 03 May 2015 07:43:52 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Sun, 03 May 2015 07:43:52 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
elsizzle2000 wrote:
How do I get ahold of your dealer? Can he sell me a set?
I'll ask him today.
Mon, 04 May 2015 19:15:31 +0000

Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
 
Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
Mon, 04 May 2015 19:15:31 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Thanks!
Progetto 300 wrote:
elsizzle2000 wrote:
How do I get ahold of your dealer? Can he sell me a set?
I'll ask him today.
Thu, 07 May 2015 07:49:03 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Thu, 07 May 2015 07:49:03 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
elsizzle2000 wrote:
Thanks!
Progetto 300 wrote:
elsizzle2000 wrote:
How do I get ahold of your dealer? Can he sell me a set?
I'll ask him today.
Just got mail from him.

Unfortunately, he refuses to send the items to Amerika.
Fri, 08 May 2015 20:56:54 +0000

Hooked
Vespa et4 125 special
Joined: Sat, 28 Jun 2014 10:26:48 +0000
Posts: 154
Location: Netherlands
 
Hooked
Vespa et4 125 special
Joined: Sat, 28 Jun 2014 10:26:48 +0000
Posts: 154
Location: Netherlands
Fri, 08 May 2015 20:56:54 +0000 linkquote
Hi looks verry good
I tuned my et 125 with lot of update
125cc to malossi 140cc
Shockers yss
Sprint 12 inch wheels
Sprint dash spoiler
Sprint 125 logo,S
Sprint carier
Exhaust GPR
Malossi air filter
Malossi vario
Malossi springs and clutch
Malossi belt
Old model sprint claxon shield
Indicators front Clear prepare self led daylight with turn light

Next update lot of exvlusive cnc parts
Gascap
Mirrors
Stearing lock
Wheelcap
Stabilizer



Mon, 11 May 2015 03:13:15 +0000

Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
 
Enthusiast
2013 Vespa 300 GTS Super Titanium
Joined: Fri, 06 May 2011 18:57:32 +0000
Posts: 81
Location: Hollywood, CA
Mon, 11 May 2015 03:13:15 +0000 linkquote
Re: Progetto 300' 2009 GTS 300 SUPER
Hmmmm how bout I pay YOU to buy a set from him and YOU can ship to AMerica?
Progetto 300 wrote:
elsizzle2000 wrote:
Thanks!
Progetto 300 wrote:
elsizzle2000 wrote:
How do I get ahold of your dealer? Can he sell me a set?
I'll ask him today.
Just got mail from him.

Unfortunately, he refuses to send the items to Amerika.
Mon, 11 May 2015 06:00:43 +0000

Hooked
Vespa et4 125 special
Joined: Sat, 28 Jun 2014 10:26:48 +0000
Posts: 154
Location: Netherlands
 
Hooked
Vespa et4 125 special
Joined: Sat, 28 Jun 2014 10:26:48 +0000
Posts: 154
Location: Netherlands
Mon, 11 May 2015 06:00:43 +0000 linkquote
Hi check our site we have exclusive Vespa parts like mirrors etc

We can sent worldwide

Www.styleforfashion.nl
⬆️    About 6w elapsed between posts    ⬇️
Fri, 19 Jun 2015 07:09:01 +0000

Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
 
Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
Fri, 19 Jun 2015 07:09:01 +0000 linkquote
Kris, do you have a picture of your vespa taken from the back?
Is the center of the rear wheel alligned with the center of the scooter?
Fri, 19 Jun 2015 07:43:10 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Fri, 19 Jun 2015 07:43:10 +0000 linkquote
shalyapin wrote:
Kris, do you have a picture of your vespa taken from the back?
Is the center of the rear wheel alligned with the center of the scooter?
No picture of that but the raar wheel sits perfectly center with the center with the scooter.

My dealer machined both wheels to fit perfect.
Fri, 19 Jun 2015 07:50:21 +0000

Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
 
Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
Fri, 19 Jun 2015 07:50:21 +0000 linkquote
Progetto 300 wrote:
shalyapin wrote:
Kris, do you have a picture of your vespa taken from the back?
Is the center of the rear wheel alligned with the center of the scooter?
No picture of that but the raar wheel sits perfectly center with the center with the scooter.

My dealer machined both wheels to fit perfect.
Clear! How many mm did he take off?
Fri, 19 Jun 2015 07:54:11 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Fri, 19 Jun 2015 07:54:11 +0000 linkquote
shalyapin wrote:
Progetto 300 wrote:
shalyapin wrote:
Kris, do you have a picture of your vespa taken from the back?
Is the center of the rear wheel alligned with the center of the scooter?
No picture of that but the raar wheel sits perfectly center with the center with the scooter.

My dealer machined both wheels to fit perfect.
Clear! How many mm did he take off?
I think around 2 mm but i'm not shure...
At the raar there's the problem that the cone will not fit inside the center hole.
He machined the rim to fit but i think it's easier to machine the cone.
Fri, 19 Jun 2015 12:19:44 +0000

Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
 
Member
Joined: Sun, 21 Sep 2014 16:58:52 +0000
Posts: 26
Location: Moscow, Russia
Fri, 19 Jun 2015 12:19:44 +0000 linkquote
Progetto 300 wrote:
shalyapin wrote:
Progetto 300 wrote:
shalyapin wrote:
Kris, do you have a picture of your vespa taken from the back?
Is the center of the rear wheel alligned with the center of the scooter?
No picture of that but the raar wheel sits perfectly center with the center with the scooter.

My dealer machined both wheels to fit perfect.
Clear! How many mm did he take off?
I think around 2 mm but i'm not shure...
At the raar there's the problem that the cone will not fit inside the center hole.
He machined the rim to fit but i think it's easier to machine the cone.
clear thanks.

P.S. Saw you in Mantova last year!
⬆️    About 1y elapsed between posts    ⬇️
Fri, 25 Mar 2016 08:35:38 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Fri, 25 Mar 2016 08:35:38 +0000 linkquote
[/quote]P.S. Saw you in Mantova last year![/quote]

...and maybe this year in St. Tropez ?
⬆️    About 4y elapsed between posts    ⬇️
Wed, 02 Sep 2020 08:31:20 +0000

Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
 
Molto Verboso
2010 GTS 300 SUPER
Joined: Wed, 02 Nov 2005 15:24:38 +0000
Posts: 1524
Location: Belgium
Wed, 02 Sep 2020 08:31:20 +0000 linkquote
RIP
So far for this project....

Got rear ended on the scooter.

Frame is bend...
   

All Content Copyright 2005-2022 by Modern Vespa. All Rights Reserved.

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Shop on Amazon Smile with Modern Vespa

[ Time: 0.0467s ][ Queries: 7 (0.0226s) ][ Debug on ][ 240 ][ Thing Two ]